35
H8030 Home Theater Projector - User Manual
• Sync Level (for Component sources only): Select Sync Level to adjust the
voltage
level of the H8030 Sync signal detection circuitry. Sync Level adjustment is
occasionally necessary when a DVD player or HDTV source signal drops “below
black” (for example, during scenes with explosions or when subtitles are present)
and causes the projector to tem¬porarily lose sync. If the Sync Level from the source
is persistently too low, the projector won’t sync with the source at all. The
range is
from 50 to 256 millivolts (mV) inclusive. The default setting is 240 mV and should
rarely require adjustment.
OSD Introduction – SYSTEM
MAIN
SERVICE
LANGUAGE
CONTROL
SYSTEM
ADVANCED
Menu = Exit
Menu Select ◄►
Scroll ▲▼
Source Enable
Menu Position
Blank Screen
Auto Power Off
Auto Power On
Rear Projection
Celling Mode
Logo Display
Lamp Power
On
Off
On
Off
On
Off
On
Off
On
Off
Economy
Standard
Enter
Source Enable:
To enable or disable selection of a source, choose Source Enable from
the System menu and press ENTER. This displays the Source Enable sub-menu
Menu Position: Select Menu Position from the System menu to change the OSD menu
position.
Blank Screen:
Select Blank Screen from the System menu to choose the color of the
blank screen that appears when no source signal is present. The options are Logo, Black,
Blue and White. The default is Black.
Auto Power Off:
Set Auto Power Off to On to have the H8030 turn itself off after 20
minutes of inactivity (no source signal present).
Auto Power On:
The default setting is Off. If you set it to ON, the projector will
automatically start up when it is connected to AC power. If you plug the projector’s power
cord into an AC socket with a switch, you can use this function to start up the projector
using the socket’s switch instead of the remote. If you do not need this function, please set
it to Off.
Rear Projection:
This control reverses all images and menus, and is necessary when the
projector is used in rear-projection applications. The default is Off.
Refer to Page 15 ---
Modes of installation
Celling Mode
:
This control flips the image so the projector can be used in ceiling mounted
installations. The default setting, Auto, automatically determines the orientation using an
internal sensor.
Refer to Page 15 --- Modes of installation
Summary of Contents for H8030
Page 1: ...H8030 User s Manual ...
