38
H8030 Home Theater Projector - User Manual
image.
•
Lamp Hours:
Display the Lamp usage time.
•
Factory Reset:
Use this function to restore the configurations in the OSD Menu back
to factory default. Note that this function will not apply to items including no signal,
network, Projector control, startup Logo, language, High Altitute mode.
•
Blue Only:
Enabling this option will make the projector display only blue color to
facilitate the process of image inspec¬tion for the service personnel. For detailed
instructions on how to use this function, consult a qualified service personnel.
•
Test Patterns:
The H8030 has numerous internal test patterns that are useful to
technicians for advanced calibration, measurement and fault isolation purposes. To
access them, select Test Patterns from the Service menu and set it to On.
Press
◄ ►
on the remote control unit or built-in keypad to cycle through the test
The available test patterns are:
•
White
•
Black
•
Red
•
Green
•
Blue
•
Cyan
•
Magenta
•
Yellow
•
ANSI Checkerboard
•
Horizontal Gray Ramp
•
Focus Grid
•
Off
• Altitude: Use this function to control the projector’s cooling fan. You can set it to Low
or High. The default setting is Off.
In most cases, the default setting (Low) will maintain the correct operating
temperature. If in certain high-altitude operating environments, you may need to
change this setting to High.
Summary of Contents for H8030
Page 1: ...H8030 User s Manual ...