Vivax ACP-18CC50GEI, User Manual, Page: 310 / 345

37
be
low
500m
m
.
Within 300mm
Drain raising
hose
.
220mm
Ceiling
Clamp(attachment)
Hoisting stand
Roof
Drain hose
1-1.5m
below
280mm
Instruction
☆
The slant gradient of the attached drain hose should
be within 75mm so that the drain hole doesn’t has to
endure the unnecessary outside force.
☆
Please install the drain hose according to the
following process if several drain hoses join together.
The specs of the selected join drain hose should fits the running capacity of the unit.
.
Above100mm
T-tie in join drain hose
☆
Check the smoothness of drain after installation.
☆
Check the drain state by immitting 600cc water slowly from the outlet vent or test hole.
☆
Check the drain in the state of refrigerating after installation of the electric circuit.
[
Way of immiting
]
.
Drain hose
Test hole cover
Test hole
Above100mm
Drain vent for repair use (plastic
stopper is included) (drain the water
in waterspout by this outlet vent)
<
Immiting water from the outlet
vent terminal
>
Plastic water pot (The length of the
pipe should be about 100mm.)
<
Immiting water from the rest hole
>
below
500
mm
.
belo
w75m
m
Drain hose(attachment)