Vivax Metrotech vCam-6, Training

Page: 65 / 97

Feed the opposite end of the lanyards
through the floating camera nut and
insert into the opposite connector base
lanyard slots. Make sure that the
lanyards are straight and not tangled in
the coiled cable.
65
Installing the Type-CP Reel Coiled
Cable and Spring
Pull the knurled camera nut up and
over the lanyards
.
Wrap a piece of electrical tape around
the floating camera nut securing the nut
with lanyards to connector
.
Slide the spring over the coiled cable
assembly. Screw the spring onto the termination
base.
Hand tighten until flush with the
termination base
.
Pull enough of the coiled cable through
the spring to work with to attach a
camera head
.