Vivax Metrotech vCam-6, Training

Page: 55 / 97

Removing and Installing
the Type-MX spring assembly
Remove any excess dirt that might
come into contact with the gold pins or
green circuit board. Check that the O-
rings are in good condition.
Grasp the termination base
in one hand while
unscrewing or screwing on
the spring assembly.
Screw on the spring assembly (or
camera head until the O-Rings are no
longer visible.
Hand tighten the camera head and spring
assembly. Do not use any tools.
Try not to touch the green circuit board or gold
pins on the spring assembly or camera head
with bare hands.
55
1 2
3 4