Vivax Metrotech vCam-6, Training

Page: 64 / 97

Installing the Type-CP Reel Coiled
Cable and Spring
Clean the threads in the
termination base then apply a
liberal bead of silicone grease to
the base female threads.
Clamp the pushrod into a vice at
the base of the termination.
Feed the two lanyards through the
floating camera nut and insert into the
lanyard slots. Make sure that the
lanyards are straight and not tangled in
the coiled cable.
Pull the floating camera nut up and over
the lanyards.
Insert the coiled cable connector
into the termination base and
hand tighten.
Do not use any tools to tighten
this connection.
Line up the 4-pin female
connector notch with the 4-pin
male connector in the termination
base.
64