OPENING THE
PROTECTION OF THE
BLADE
The blade guard extends being
pulled automatically through the
wood cutting. To open it manually,
use the lever (I).
EXTRACTION OF POWDER
A circular saw is equipped with a
hole for dust extraction.
MAINTENANCE
Warning: Make sure that the
machine is switched off button
and power before making any
adjustments or maintenance
procedure. Always wear gloves
resistant to move or replace blades.
Keep breathing unimpeded
and clean it after each use.
Check regularly that joined the grid
engine or trigger any residue that
prevents normal operation
of the machine. Use a soft brush
to remove dust accumulated.
Use eye protection while cleaning
the machine. Lubricate all moving
parts at regular intervals.
If the saw body needs to be
cleaned, use a damp cloth and mild.
It can be also used a mild detergent,
but anything with alcohol, gasoline
or other cleaning agent. Never use
abrasives to clean the plastic parts.
CAUTION
The water should never come into
contact with the saw.
GENERAL INSPECTION
Periodically check the screws are
tight. If the connection cable need
to be replaced, the task should be
carried out by a qualified technician
in order to avoid possible dangers.
SYMBOLS
The nameplate on the machine can
contain some symbols.
These represent important
information about the product
or instructions for its use.
Use eye protection.
Use eye protection.
Use respiratory protection.
Double insulated for added
protection. As safety standards.
Recycle unwanted materials rather
than dispose of them as waste.
All tools, hoses and packaging
should be sorted, taken to the
recycling facility and disposed
in an environmentally safe.
Read the instruction manual.
DECLARATION
OF CONFORMITY
21
We declare under our exclusive
responsibility, that the product
circular saw, with code
VISC12185A, meets the following
standards or standardization
documents:
EN 60745- 1:2009+A11, EN
60745-2-5:2010, AfPS GS
2014:01, EN 550141:2006+A1+A2,
EN 55014-2:2015, EN 610003-
2:2014, EN 61000-3-3:2013,
according to the determinations of
the directives:
2006/42/EC - Machinery
Directive;
2014/30/EU - Electromagnetic
compatibility directive.
S. João de Ver, 30
th
June 2021
Central Lobão S. A.
Responsible for the Technical File
Hugo Santos
WARRANTY TERMS
The warranty of this machine is two
years from the date of purchase.
You should, therefore, keep your
proof of purchase during this period
of time. The warranty covers any
manufacturing defect in material or
operating, as well as parts and work
needed for their recovery. Excluded
from the warranty the misuse of the
product, any repairs carried out by
unauthorized persons (outside the
service center of the brand VITO)
as well as any damage caused by
the use of it.
Summary of Contents for PRO-POWER 9711675
Page 27: ......
