ENVI Series: VTC-IR40-N
53
•
Video with Flexible Extra System data: If Enabled, video data will contain UART sensor
data from COM port..
(
Feature not available on this model)
•
Video with user defined message: If Enabled, video data will contain the user-defined
data. (Reserved Field).
(
Feature not available on this model)
•
Video with PPP status: If Enabled, video data will contain PPP connection status..
(
Feature not
available on this model)
•
Video with camera name: If Enabled, video data will contain the camera name..
(
Feature not
available on this model)
•
Video with server name: If Enabled, video data will contain the server name that you
defined..
(
Feature not available on this model)
•
Video with IP address: If Enabled, video data will contain the IP address of the video
server..
(
Feature not available on this model)
•
Audio: (not available on all models) Select if Audio function is to be used (applies to Primary
Stream only). VITEK Cameras provides 2-way audio streaming by combining microphone input
with video data. Users can listen to the streamed audio through a PC and speakers.
•
Frame Rate: For Primary Stream, this is the number of frames compressed in every second.
You can control the network traffic with this parameter. For Secondary Stream, it can be set to a
manner of 1/2, 1/4, 1/8... of the primary stream.
•
Image Size: Select the resolution of each channel’s video
•
Encoding Standard: Select the compression method of each video, either M-JPEG or H.264
format. It is not allowed to set both channels to M-JPEG.
Below is the table of images sizes. To save the setting, click Apply button
Video Format
SXGA
D1
CIF
QCIF
Summary of Contents for VTC-IR40-N
Page 8: ...ENVI Series VTC IR40 N 7 3 VTC IR40 N Layout 3 1 Front View 3 2 Rear Side View...
Page 57: ...ENVI Series VTC IR40 N 56 Exposure AGC Automatic Gain Control You can adjust the AGC manually...
Page 146: ...ENVI Series VTC IR40 N 145 Enhanced Draw Mode On Off Enhance image for a better reproduction...