Vitek VTC-IR40-N, User Manual

Page: 121 / 194

ENVI Series: VTC-IR40-N
120
25. Components of EN-V-R Program
EN-V-R consists of three programs, (
EN-V-R Service, EN-V-R Configurator, and EN-V-R Controller).
25.1. EN-V-R Configurator
EN-V-R Configurator is used to set up various parameters and conditions of EN-V-R Service. Users can
register, modify, and delete IP devices and users with this program. It also provides configuring tools for
recording, alarm, event, and other functions.
25.2. EN-V-R Service
EN-V-R program is a Windows service and runs in a background mode, which means that it is not shown
on the Windows desktop. EN-V-R receives video, audio, alarm, even data from IP devices over the
network, and then it can record the data on the hard drive or retransmit to users. Starting, terminating
and restarting of EN-V-R program can be done by using EN-V-R Configuration or EN-V-R Controller.
25.3. EN-V-R Controller
EN-V-R Controller program is used to start or stop the EN-V-R service.
25.4. EN-V-R System Tray Menu
After you finish installing EN-V-R, you will find the EN-V-R icon on the system tray, which is located right,
bottom part of the Windows desktop.
Move the cursor over the icon, and right click. The following pop-up menu will show. You can open EN-V-
R Configurator or EN-V-R Controller program from this menu, or you can go to the Home page of the EN-
V-R program for live view or playback.