ENVI Series: VTC-IR40-N
182
36.6.1.
User Registration
To register a new user, click the 1'st button on the tool bar in the sub-menu toolbar.
36.6.2.
User Modification
Items
Descriptions
A
User ID
Enter a new User ID to register.
B
Password
Enter the Password for the new user.
C
Confirm password Enter the same Password for confirmation.
D
Name
Enter the name of the new user to be registered.
E
System resource
access permission
Choose the level of permission for System resource access.
•
All channels access: Viewing all cameras, Alarm, PTZ, Audio, Searching
•
General access: Viewing all cameras only
•
No access: An user account without any access to cameras
•
Selective access: Access to only selected cameras and privileges.
F
System
Permission
Eight different modules can be set. The setup can be made on Module,
camera, alarm, PTZ, Audio, and Search respectively. Enabling each
module gives accesspermission to it.
G
OK
Click this button to apply the registration of the new user.
H
Cancel
Click this button to cancel the registration process.
Summary of Contents for VTC-IR40-N
Page 8: ...ENVI Series VTC IR40 N 7 3 VTC IR40 N Layout 3 1 Front View 3 2 Rear Side View...
Page 57: ...ENVI Series VTC IR40 N 56 Exposure AGC Automatic Gain Control You can adjust the AGC manually...
Page 146: ...ENVI Series VTC IR40 N 145 Enhanced Draw Mode On Off Enhance image for a better reproduction...