VT-PTZ Series
31
PROGRAM & OPERATION
Title
: 16 digits of title for tour label
- - -
: blank preset position
SP
: F-Normal/ M- Medium D.Scan/
S- Slowest D.Scan
DW:
03-99 Sec
Prst
: PRESET 1~248
Ptrn
: PATTERN 1~8
Scan
: SCAN 1~16
Tour
: TOUR 2~8
Follow the steps below to program the Tours:
1. Press
MENU => Functions => Tour (Short
Cut
: TOUR)
to display the tour menu on the
monitor.
No. + SHFT+TOUR
will open directly to that Tour
No.
2. Choose an empty location of function by moving the
Joystick
up or down.
3. Stored Preset view can be recalled by pressing
Prst
button,
4. To place predefined functions as a Tour, press the function buttons (such as
Tour
,
Ptrn
,
or
Scan
,
Prst
).
Then select function No. by twisting the Zoom handle. (Programmed function No. will be
scrolled).
5. To remove functions from the Tour, press the
HOME
or
Off
button, blank position mark
(- - -) will be displayed. You can overwrite the programmed position.
6. Repeat Step 2 through 4 for each desired position. Each title will be displayed on top of
the line.
7. Up to 8 Presets, Tours, Patterns Scans can be selected for a Tour. You can expand the
Tour sequence by calling other programmed tours. Moving the
Joystick
handle to right
or left while the cursor is on the top of the line (TOUR 01) to select another page of the
Tour menu. (TOUR 01)
8. You can enter a title for the selected Tour by twisting the
Joystick
while the cursor is on
the top of the line (TOUR 01). Rotate the handle clockwise or counterclockwise to scroll
through the alphanumeric characters. Move the handle to the right or left to select the
next or previous digit.
9. Select Save and Exit by moving the
Joystick
to the right. Press
ESC
to exit the program
without saving.
NOTE
: All functions should be programmed before being referred to in the tour menu.
Otherwise functions won’t be selectable by item 4 in the procedure.