manualshive.com logo in svg

Vitek VT-PTZ40WH, User Manual

Share
Download
Vitek VT-PTZ40WH User Manual Download Page 44

VT-PTZ Series

 

 

 

43 

PROGRAM & OPERATION 

 

4. CAMERA SETUP (MENU => Camera) 

 

NOTE:

 The menu features will vary depending on the camera module.

  

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

Ÿ

 Back Light: 

Objects in front of bright backgrounds will be clearer with BLC ON. 

NOTE:

 

The Back Light operates in AUTO mode only.

  

Ÿ

 Sharpness: 

The higher the value, the more edges in the picture will be enhanced,     

TYPE A :( 0~15), TYPE B :( 0~63,AUTO) 

Ÿ

 Digital Zoom

   OFF: Zoom range is limited to the optical. 

2x    : Zoom is extended up to 2x of digital range. 
4x    : Zoom is extended up to 4x of digital range.                      
MAX: Zoom is extended Max digital zoom range. 

Ÿ

 Defog: 

When the surrounding area of the subject is foggy and low contrast, 

the defog mode will make the subject appear clearer by emphasizing 
the contrast automatically.  

 

4.1 FOCUS CONTROL (MENU => Camera =>Focus Control) 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

Ÿ

 

Mode

: AUTO / MANUAL 

Summary of Contents for VT-PTZ40WH































































Reviews:

No comments

Brands by name

Popular brands

Load more brands