VT-PTZ Series
32
PROGRAM & OPERATION
1.5 PATTERN (MENU => Function => Pattern or Shortcut: PTRN)
The Pattern function memorizes and stores movement of the selected dome camera for up
to 480 seconds. A total of 480 seconds is allotted for all 8 patterns. Stored pattern is played
back by pressing
No.
+
PTRN
buttons subsequently
Follow the steps below to program a Pattern:
1. Press the
PTRN
key.
(
or
MENU => Function=>Pattern)
2. Select an empty Pattern number to be programmed by moving the
Joystick
up or down.
If SEC column is not 000, then the selected No. of pattern is already recorded.
3. Twist joystick CCW/CW, The pattern movement will automatically start recording until
the focus button is pressed. This procedure can be repeated to reprogram the pattern.
4. Scroll down to the Save and Exit option and move the
Joystick
to the right to save and
exit.
5. Move to the title field to edit/enter the name. Rotate the handle CCW/CW or press
Tele
or
Wide
button to enter the Edit title menu. Refer to section
1.2.6
to change name
6. Pressing
ESC
will not save recorded data and will exit to the previous menu. Press the
HOME
or
OFF
button at any programmed position to delete the programmed pattern.
NOTE
: If total recording time reaches 480 seconds, it will automatically stop.
1.6 RUN FUNCTION (MENU => Functions => Run function)
1. Select the function and number and action to be exacted.
2. Select Run by moving the joystick to right.
