![Vitek VT-PTZ40WH User Manual Download Page 15](http://html1.mh-extra.com/html/vitek/vt-ptz40wh/vt-ptz40wh_user-manual_1036408015.webp)
VT-PTZ Series
14
INSTALLATION AND CONFIGURATION
The dome camera must be installed by qualified service personnel. Before installing the
dome camera system, this instruction manual must be read thoroughly and understood fully.
Dome cameras must be set up properly before starting the installation. This involves properly
setting configuration switches. Figure 6 shows the location of these switches.
Figure 6 - Layout of Switches
Setting the Video System
Select Video system NTSC/PAL and Analog or Web Dome, if Web Dome is selected, user
should check if purchased model is supported.
Figure 7 - Setting the Video System
SW2
1
2
3
4
NTSC
ON
X
X
X
PAL
OFF
X
X
X
Analog Dome
X
ON
X
X
Web Dome
X
OFF
X
X