background image

28492 Constellation Road ValenCia, Ca 91355

WWW.ViteKCCtV.CoM

LIMITED PRODUCT WARRANTY

VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that 
products manufactured by VITEK are free of any rightful claim of infringement or the like, and 
when used in the manner intended, will be free of defects in materials and workmanship for 
a period of three (3) years, or as otherwise stated above, from the date of purchase by the 
end user. This warranty is nontransferable and extends only to the original buyer or end user 
customer of a VITEK Authorized Reseller.

The product must have been used only for its intended purpose, and not been subjected to 
damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the guarantee will be 
considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become necessary.

VITEK makes no warranty or guarantee whatsoever with respect to products sold or 
purchased through unauthorized sales channels. Warranty support is available only if product 
is purchased through a VITEK Authorized Reseller.

Version 1.0

Nov 2014

Summary of Contents for VT-PTZ40WH































































Reviews: