VT-PTZ Series
25
PROGRAM & OPERATION
1.2 PRESET (MENU => Functions => Preset Shortcut: PRST)
Preset stores pan, tilt, zoom, focus and iris settings. Once programmed, pressing
combination of
0
~
9
numbers and the
Preset
button on the controller should automatically
call up the preset position. Presets may be assigned to alarm actions or as the “home”
position for the dome camera.
There are 31 pages of preset programming menu. Each page can hold up to 8 presets.
Locate the
“Previous Next
”; preset menu pages can be scrolled by moving the
Joystick
to
the Left or Right on the “
Previous Next
”
.
F: FOCUS-Auto or Manual
A: AE Auto, Manual, Shutter,
Iris, Bright
B: BLC-On /F-Off
M: MOTION On /F-Off
T: TRACKING On /F-Off
W: WDR (*) On/F (Off) or Auto
- : not defined
AE Setting:
Auto-Iris and Gain
Manual-Variable Shutter, Iris and Gain
Shutter-Variable Shutter Speed, Auto Iris and Gain
Iris-Variable Iris, Auto Gain and Shutter speed
Bright- Variable Iris and Gain
* This function may not be available according to the model.
Follow the steps below to program the Preset positions.
1. On keyboard, Select the camera number by pressing
0
~
9
and
CAM
.
2. Press
PRST
button to enter preset menu. (
MENU
=> Functions => Preset
)
3. Select the empty preset location to be programmed by moving the
Joystick
up/down. If
selected location is not empty, you can delete by selecting and pressing the off button
on the keyboard.
4. If selecting an empty position, twist the joystick CCW/CW to start PTZ control for view
selection.)
5. After aiming the camera (view direction and lens control) to a specific position, press the
Focus (Near and Far) buttons. The selected location No. field will be filled with “
A A F F
F F
”. Change each FOCUS/ AE/ BLC/ MOTION/ TRACKING/ WDR mode using zoom
handle.
6. To edit name, highlight and twist joystick CCW/CW to enter the character table as
below
