manualshive.com logo in svg

Vitek VT-PTZ40WH, User Manual

Share
Download
Vitek VT-PTZ40WH User Manual Download Page 35

 

VT-PTZ Series 

 

 

 

34 

PROGRAM & OPERATION 

 

There are 9 levels of priority. 0= Highest priority, supports repeated/dedicated functions like 
a Pattern (Pxx), Tour (Txx), Scan (Sxx). 1~8: Same level of alarm calls presets one after the 
other. 

Ex)

 Alarm 01 calls Pattern 01, after alarm 01 is released alarm 02, 03 will call 

preset 48

 and 

preset 01 

 

1. Press Menu to display the main menu on the monitor.  Select the Alarm option by moving 
the 

Joystick

 up/down and then move to the right to enter the detail menu. 

2. Select the alarm input number by moving the 

Joystick

 up or down and select the column 

to setup. Selected position will be highlighted. 
3. Select the Preset, Status of Input (NC/NO/OFF), and Output (R01~R02/OFF) by moving 
the Joystick to the right or to the left. 
4. To increase or decrease the preset number or to change the status or output number, 
twist the 

Joystick

 CCW/CW. In case of preset, programmed preset number will be scrolled. 

5. Position the cursor on 

Save and exit

 and moving the 

Joystick

 to the Save and exit. 

Press 

ESC

 to exit the program without saving. 

 
 

2.2 ALARM LIST (MENU => Actions Setup => Alarm List) 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Ÿ

 

DATE

: display according to the date format.  

Ÿ

 TIME

: display in 24 Hour format only. 

Ÿ

 The alarm list displays the date and time, and alarm input number up to 80 alarms. 

Ÿ

 Push the 

Joystick

 right or left at “Previous Next” to see the next numbers.  

Ÿ

 

A001

: means the alarm occurs on alarm input 1. 

Ÿ

 

M001

: means motion occurred on preset 001. 

 
* This list is not cleared by the factory default operation. 
 
 
 

Summary of Contents for VT-PTZ40WH































































Reviews:

No comments

Brands by name

Popular brands

Load more brands