ENGLISH
•
During the operation use only the pusher (1) sup
plied with the unit; do not use any other objects to
push vegetables, never push vegetables or fruit
with your hands.
•
Pulp outlets control knob (32) changes the gap
between the screw (29) and the mesh filter
holder (30); turning the knob (32) in the direc
tion «MAX - MIN» find the perfect proportion of
fruit and vegetable juice/squash and the amount
of pulp outlets.
•
If during the use of the juice extractor attachment
the amount of juice/squash decreased, switch
the meat grinder off, unplug it, dismantle the
juice extractor and wash the mesh filter.
•
After you finish operating, switch the meat
grinder off, pressing the button (
12
) « (Э » , and
unplug it.
•
To remove the juice extractor attachm ent (28)
press the lock button (5), turn the attachm ent
clockwise and remove it.
•
Dismantle the juice extractor attachm ent and
wash all parts.
MEAT GRINDER CARE
•
A fteryoufinishoperating, switch the meat grinder
off, pressing the button (
12
) « (Э » , unplug it and
only after that you can disassemble it.
•
Unscrew the nut (17) and remove the installed
attachm ents (18, 19 or 20), the cutting plates (15
or 16) and the crossed blade (14) from the screw
(13)
(pic.
11
).
•
Press the lock button (5), turn the meat grinder
head (3) clockwise and remove it (pic. 12).
•
Remove the screw (13) from the meat grinder
head (3).
•
Remove the remains of the products from the
screw (13).
• Wash all the used parts of the meat grinder with
warm water and a neutral detergent, then rinse
and dry thoroughly before assembling.
•
Use the cutting plate holder (21) to remove the
remaining meat from the cutting plate (15, 16)
openings (pic. 13).
Dismantling the juice ex tra c to r attachm ent
(28):
- Press the lock button (5), turn the juice extractor
(28) clockwise and remove it.
- Turn the lid (31) to the mark «OPEN» and remove
it.
- Remove the mesh filter (30) and the separator
(29) from the attachm ent (
28
) body.
- Wash all the details and dry them before assem
bling.
•
Cover the meat grinder head setting place (4)
with the cover (
22
).
•
Clean the meat grinder body (
6
) with a slightly
damp cloth and then wipe dry.
•
Do not use solvents or abrasives to clean the
meat grinder body (
6
).
•
Provide that no water gets inside the meat
grinder body.
•
Before you put the accessories away fo r storage,
make sure that they are dry.
•
For easy storage of the attachm ents, the storage
com partm ent (9) is provided in the unit.
•
Put the attachm ents into the com partm ent
according to pictures 16-22. You may store the
cutting plates (15 and 16) and the nut (17) in the
pusher (21) body (pic. 13).
•
Close the com partm ent with the lid (
8
).
•
Put the power cord into special com partm ent on
the meat grinder body bottom.
DELIVERY SET
Meat grinder with the attachm ents set inside - 1 pc.
Food tray - 1 pc.
Vegetable slicer attachm ents set - 1 pc.
Juice extractor attachm ent - 1 pc.
Cover - 1 pc.
Instruction manual - 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60Hz
Rated power: 500 W
Maximal power: 2000 W
The m anufacturer preserves the rig h t to change
design and specifications o f the u n it without a p re
lim inary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the term s
of this guarantee.
^
^
This product conforms to the EMC-Requirements as
laid down by the Council Directive 2004/10 8/Е С and
^ ^
to the Low Voltage Regulation ( 2006/95 /Е С )
8
V T -3602 IM .in d d 8
16.09.2013 15:37:58
1
