Vitek VT-2501 VT, Manual Instruction

Page: 4 / 48

4
ening them from lower layers upwards. Bruch hair
downright using round or flat brush, simultaneously
directing hot air blowing from concentrating nozzle
on them. Straighten each lock from root to tip this
way. After you have finished straitening locks of the
lower layer, start processing the locks of medium
layer, and so on, and finish with straitening locks of
the upper layer.
natural waving structure of your hair
Set switch (2) into position of slight heating (posi-
tion 1), then set switch (2) into position 1, hold a
lock between your fingers tightly, turn it to direction
of its natural curliness, then dry the lock out by di-
recting air jet between the fingers. After getting the
shape you need, press cool shot button COOL (2)
and fix each lock.
rising up and volume
Using hairdryer in any mode of heating/any speed
from slight to maximal, dry out hair roots beginning
from backside of your head.
styling your hair
Set switches (1,2) into positions of slight heating
and slow speed correspondingly, attach concen-
trating nozzle (6) to provide directed airflow.
Divide your hair into locks and start creating hair-
style you need using round brush for setting hair.
While styling, direct airflow straight on your hair in
any direction you want.
If necessary, direct air jet on each lock for 2-5 sec-
onds to fix it. Time of setting locks you should deter-
mine on your own taking into account type of your
hair.
“cool shot”
This model is equipped with function of “cool shot”,
which can be used for fixing your hairstyle. Press
and hold “cool shot” button (3). This option helps to
protect the hairstyle you have created.
protection against overheating
The appliance is equipped with function of protec-
tion against overheating. This function switches the
appliance off if temperature of outgoing air is higher
then admitted. If hairdryer is switched off during op-
eration, turn it off by setting switch (1) into position
“0”, take power cord plug out of wall outlet, exam-
ine if air inlet or outlet openings are blocked, leave
the appliance for a while for cooling down for 5-10
minutes, then switch it on again. Do not block air
openings while using hairdryer and avoid your hair
getting inside its air inlet opening.
cleaning and maintenance
This hairdryer is intended for household usage only.
• It is recommended to remove air inlet grill (4) and
clean it from time to time.
• Set switch (1) into position “0” and disconnect
the appliance from power supply.
• Press slightly on lugs located on the grill (4) and
detach the grill. Clean the grill by brush and close
air inlet by it again.
• Wipe hairdryer housing with damp cloth and wipe
it dry afterwards.
storage
• Unplug power cord from wall outlet when hair-
dryer is not in use.
• Do not wind power cord around the appliance as
doing so may cause cord’s malfunction. Handle
power cord carefully, do not pull, twist or stretch
it, especially near the plug and the place of con-
nection with appliance housing. If power cord is
twisted during operation, straighten it from time
to time.
• Eyelid for hanging (5) is provided for convenient
storage. You can hang the appliance this way
on condition there is not any possibility of water
dropping on the appliance.
• Store hairdryer at a place inaccessible by chil-
dren.
delivery set
1. Hairdryer – 1 piece
2. Concentrating nozzle – 1 piece
3. Operating manual – 1 piece
specifications
Supply voltage: 220-240 V ~ 50 Hz
Power: 1510-1800 W
The manufacturer reserves the right to change the
device’s characteristics without prior notice.
Service life of the unit - 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 89/336/EEC and to the Low
Voltage Regulation (73/23 EEC)
enGLisH
2501.indd 4 23.12.2011 10:55:08