3
ENGLISH
MEAT GRINDER VT-1671
The meat grinder is intended for processing
products and making homemade semi-finished
products.
DESCRIPTION
1. Pusher
2. Food tray
3. Meat grinder head body
4. Meat grinder head installation place
5. Meat grinder head lock button
6. Meat grinder body
7. Operation mode switch (ON/0/R)
8. Reverse switch (ON/R)
9. Crossed blade
10. Screw
11. Coarse cutting plate
12. Meat grinder head nut
13. Fine cutting plate
14. Regular cutting plate
15. Vegetable slicer attachment pusher
16. Vegetable slicer body
17. Coarse grater
18. Slicer
19. Fine grater
20. Kebbe attachment
21. Sausage filling attachment
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal opera-
tion current not exceeding 30 mA. To install an RCD
contact a specialist.
SAFETY MEASURES
Read this instruction manual carefully before using the
unit and keep it for the whole unit operation period.
Mishandling of the unit may lead to its breakage and
cause harm to the user or damage to his/her property.
To reduce the risk of fire, to prevent electric shock
and to avoid other injuries, it is necessary to observe
the following safety measures when using the elec-
tric meat grinder:
•
Before switching the unit on for the first time,
make sure that the voltage in your mains corre-
sponds to the operating voltage of the unit.
•
Use only the accessories supplied with the unit.
•
To avoid electric shock, NEVER IMMERSE the
unit, the power cord and the power plug into
water or any other liquids.
•
Use a slightly damp cloth to clean the meat
grinder body and then wipe the unit body dry.
•
Never leave the operating meat grinder unattended.
•
Always switch the meat grinder off and unplug it
before assembling, disassembling and cleaning.
•
Place the unit on a flat steady surface away from
heat sources, open flame, moisture and direct
sunlight.
•
Do not set the unit on a heated surface or next to
it (for instance, near a gas or electric stove, near
a heated oven or a cooking surface).
•
Handle the power cord with care, prevent it from
multiple twisting and straighten the power cord
periodically.
•
Do not use the power cord for carrying the meat
grinder.
•
Do not let the power cord hang from the edge of a
table, and make sure that the cord does not touch
sharp furniture edges and hot surfaces.
•
When unplugging the unit from the mains, hold
the power plug but not the cord.
•
Do not connect or disconnect the power cord
from the mains and do not touch it with wet hands,
this may cause electric shock.
•
This unit is not intended for usage by children.
•
Do not allow children to touch the unit body and
the power cord during the unit operation.
•
During operation and breaks between operation
cycles, the unit should be placed out of reach of
children.
•
The unit is not intended to be used by people with
physical, sensory or mental disabilities (includ-
ing children) or by persons lacking experience
or knowledge if they are not under supervision
of a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
•
Do not leave children unattended to avoid them
using the unit as a toy.
•
For children safety reasons do not leave polyeth-
ylene bags, used as packaging, unattended.
Attention! Do not let children play with polyethyl-
ene bags or packaging film. Danger of suffocation!
•
If the power cord is damaged, it should be
replaced by the manufacturer, a maintenance
service or similar qualified personnel to avoid
danger.
•
Do not attempt to repair the unit. Do not disas-
semble the unit, if any malfunction is detected or
after it was dropped, unplug the unit and apply to
any authorized service center from the contact
address list given in the warranty certificate and
on the website www.vitek.ru.
•
To avoid damages, transport the unit in the origi-
nal package only.
•
Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY. ITS COMMERCIAL USAGE AND USAGE IN
PRODUCTION AREAS AND WORK SPACES IS PRO-
HIBITED.
ATTENTION!
•
Before grinding meat, make sure that all bones
and excess fat are removed.
Summary of Contents for VT-1671
