HD-SDI CAMERA
29
number.
2. Move the cursor position with Joystick (up/down)
3. Select the column number(01)
4. Control the Joystick(tele/wide) to Open the PATTERN AREA SETUP menu
The recording starts.
1. Scan the relevant area.
2. Press the
IRIS-OPEN
button to save the recording.
The
PATTERN SETUP
is displayed again.
3. Select the column TITLE and then control the joystick(tele/wide)
4. Edit the title of the pattern (see section 10.1.2.1 Edit Title).
If the total recording time reaches 480 seconds, the recording is stopped
automatically.
When you start to record again, the previous data will be overwritten.
5. Execute Save and Exit.
To run a stored pattern directly from the dome menu, go to Run Function in the
PATTERN SETUP
NO
TITLE
SEC
01
PATTERN1
045
02
PATTERN2
000
03
PATTERN3
000
04
PATTERN4
000
05
PATTERN5
000
06
PATTERN6
000
07
PATTERN7
000
08
PATTERN8
000
TOTAL
Save and Exit
PATTERN AREA SETUP
CONTROL
1 :000 SEC
Total :000 SEC
Press IRIS-OPEN to save
320.0 000.9 1.3X
Summary of Contents for OnCue VT-PTZ230HD
