Vitek OnCue VT-PTZ230HD, Manual

Page: 28 / 72

HD-SDI CAMERA
27
1. Edit the title of the Position Preset (see section 10.1.2.1.Edit Title).
2. Edit the camera position (see section 10.1.2.2. Edit Position).
3. Edit the camera AE settings (see section 10.4.1. AE Control).
4. Edit the camera WB settings (see section 10.4.2. WB Control).
5. Edit the camera Focus settings (Auto/One Push/Manual).
6. Edit the camera Night Shot settings (see section 10.4.4. Night Shot Setup).
7. Edit the camera Gamma settings (see section 10.4.6. Gamma).
8. Edit the camera Noise Filter settings (OFF/1~5).
9. Execute Save and Exit to save the settings and exit the submenu.
To run a stored position preset directly from the dome menu, go to Run Function
in the main DOME MENU.
10.1.2.1 Edit Title
Open the Title menu.
An alphanumeric character table is displayed on the monitor screen.
Blinking cursor (P) Digit position
Yellow cursor (P) Current cursor position
1. Move the cursor with the joystick to select a digit position in the title line.
2. Move the cursor with the joystick to a character in the character table.
3. Control the joystick (TELE/WIDE)
to set the selected character.
The cursor in the title line moves to the next digit position automatically.
To delete all characters, select and execute Delete All.
4. Execute Save and Exit with Control the joystick(TELE/WIDE)
10.1.2.2 Edit Position
1. Open the Edit Position menu.
EDIT TITLE
PRESET1
123456790 Space
ABCDEFGHIJ
Backspace
KLMNOPQRST Insert
UVWXYZ()-/ Delete
Abcdefghij Delete All
Klmnopqrst Exit
uvwxyz*,.: Save and Exit