HD-SDI CAMERA
42
1. Select an Area Title item.
2. Select the Start angle field.
3. Control the Joystick (tele/wide)
to edit the start position.
4. Edit the start position.
5. Press the
IRIS-OPEN
to
save the settings.
6. Select the End angle field.
7. Control the Joystick (tele/wide)
to edit the end position.
8. Edit the end position.
9. Press the
IRIS-OPEN
to
save the settings.
10. Select the Title (or Number) field.
11. Control the joystick (tele/wide) to edit the area title (see section 10.1.2.1 Edit
Title).
12. Execute Save and Exit.
13. Select Previous or Next to list previous or next area titles.
If the PTZ dome camera is positioned over 90° vertically, first move the PTZ
dome camera to 90° vertically. Otherwise, the PTZ dome camera moves to 90°
vertically automatically when you edit the position.
10.3.5 CAMERA TITLE
This function allows the users to set the title of camera as well as the usage of on
screen display of the title.
Twist the joystick handle on the Camera Title. Refer to the preset title
Zone TITLE SETUP
01/03
NO Title
Start End
01
----- -----
02
----- -----
03
----- -----
04
----- -----
05
----- -----
06
----- -----
07
----- -----
08
----- -----
Previous Next
Save and Exit
Summary of Contents for OnCue VT-PTZ230HD
