Vitek OnCue VT-PTZ230HD, Manual

Page: 48 / 72

HD-SDI CAMERA
47
10.4.2 WB Control (White Balance)
Mode
AUTO:
Automatically and permanently computes the white balance value output using
color information from the entire screen (based on a range of values from 3000 to
7500K).
This mode is the default setting.
INDOOR:
Setting for indoor use at a color temperature of 3200K.
OUTDOOR:
Setting for outdoor use at a color temperature of
5800K.
ONE PUSH:
One Push White Balance mode is a fixed WB mode that may be automatically
readjusted only at user request (One Push Trigger) assuming that a white subject,
in correct lighting conditions, is located in more than a half of the entire image.
One Push White Balance values are lost if the device is turned off.
MANUAL:
Manual adjustment of (R)ed and (B)lue Gain.
ATW:
Automatically, Tracing White balance
R GAIN
Red Gain (0–255)
Adjustable in MANUAL mode only.
B GAIN
Blue Gain (0–255)
WB CONTROL
Mode :AUTO
R Gain :208
B Gain :160
Execute One Push
Save and Exit