HD-SDI CAMERA
58
4.
Repeat the above-mentioned procedure with the same numbers.
If both passwords match, the password editing is completed and the
message “Password match” is displayed.
If the passwords don’t match, the message “Password do not match” is
displayed.
If so, try it again.
5.
Select the Save and Exit.
If enable password
ON
, the
INPUT PASSWORD
screen is always displayed
when trying to enter the main DOME MENU.
10.7.7 Installation
Installation : Normal / Desktop
10.7.8 Flip Offset
Flip Offset : Adjust the small amount of position error from flip area.
10.7.9 System Information
This screen displays information of the PTZ dome camera for service or trouble
shooting purposes.
INPUT PASSWORD :0
UP/DOWN to change
TELE/OPEN to Enter
RIGHT to Move
DOME INFORMATION
H/W Ver.
:V1.0
S/W Ver.
:V1.43
FPGA Ver. :v1.0
Camera
:EH6300
Con. Type :DC2
ID
:0001
Baud rate
:9600 bps
Protocol
:EZ
Exit
Summary of Contents for OnCue VT-PTZ230HD
