Vitek OnCue VT-PTZ230HD, Manual

Page: 64 / 72

HD-SDI CAMERA
63
11.3 TROUBLE SHOOTING
If problems occur, verify the installation of the camera with the instructions in this manual.
Isolate the problem from the equipments in the system and refer to the equipment manual for
further information.
Problem Solution
Nothing appears on the screen.
1.Check that the power cord and line connection
between the camera and monitor are properly
connected.
2.When the camera’s HD-SDI BNC output is
directly connected to the monitor’s BNC
terminal:
-Make sure the monitor supports
HD-SDI signal input.
3.When the camera’s HD-SDI BNC output is
connected to the DVR:
-Make sure the DVR supports HD-SDI signal input.
4.HD-SDI output is converted into other format such as
DVI and VGA by using video converter: Make sure the
converter’s HD-SDI input format
supports the product’s output video format.
The camera is not working properly,
and the surface of the
camera is hot. Check that you have properly connected the camera to
an appropriate power source.
The image on the screen is dark. Adjust the contrast feature of the monitor.
The image on the screen is dim.
1. Is lens stained with dirt?
Clean your lens with soft, clean cloth.
2. Set the monitor to the proper condition.
If the camera is exposed to very strong light, change
the camera position.
Color is not correct. Check the setting of WHITE BAL SETUP menu.
The screen flickers continually.
1. Ensure the camera is not pointing towards the sun.
Is the camera framing the sun or other bright light
source?
2. HD-SDI video may not appear to be normal if
distance exceeds the maximum transferrable distance.
.