Appendix
PowerDome Installation Manual
A
PPENDIX
A: M
OUNTING
A
CCESSORIES
VPD-FCA F
IXED
C
AMERA
A
DAPTER
The VPD-FCA camera adapters install into PowerDome flush or pendant housings. Units come packaged
from the factory pre-wired with video and power cables.
To install the bracket see Figure 49 and perform the following.
Figure 49. Installing the fixed camera adapter
1)
Attach the camera and lens to the fixed assembly with the appropriate mounting screw and lock
washer.
2)
Insert the safety catch ( ) though the channel in the retaining bracket ( ) attached to the upper
housing.
3)
Push the spring latch handle ( ) outward while pivoting the pan/tilt assembly up until it is vertical.
4)
Secure the pan/tilt assembly by releasing the latch handle and engaging the catch tab ( ).
5)
Check to ensure that the four cap nuts ( ) are mated with the four plastic nuts ( ).
6)
Adjust the camera to the desired position.
7)
If necessary, move the camera forward on the bracket so that the lens will be located closer to the
lower dome.
34
1040647A / July 2003
Summary of Contents for PowerDome Series
Page 1: ...PowerDome Series Installation Manual...
Page 44: ......
