Housing Installation
PowerDome Installation Manual
To complete the mount installation perform the
following.
Figure 44. Connecting the housing to the swing arm
1)
Push the cables and interface module back
into the swing arm, guide the flange of the
housing into the collar of the swing arm
(matching up the mating holes), and fasten
the housing to the swing arm using the three
10-32x3/8 screws provided. See Figure 44.
2)
To install the optional heater/fan assembly
see Appendix B.
Note:
After the PTZ assembly and dome are installed,
loosen the pivot locking screws on the mounting socket
and swing the swing arm (with PowerDome attached) out
to the desired position, and again securely tighten the
pivot locking screws.
28
1040647A / July 2003
Summary of Contents for PowerDome Series
Page 1: ...PowerDome Series Installation Manual...
Page 44: ......
