PowerDome Installation Manual
Housing Installation
Figure 18. Installing the interface module into the VPD-WM
4)
Attach the VPD-WM cover with the hardware provided as shown in Figure 19.
Figure 19. Attaching the VPD-WM cover
CAUTION:
Before making connections to the housing, secure the safety chain on the housing to the safety clip
inside the VPD-WM Wall Mount.
Do not remove the safety cable after housing is installed
.
To attach the housing safety cable to the mount safety clip see Figure 20 and perform the following.
1)
Slide a section of the safety cable into the groove in the safety clip.
Note:
Ensure that the taut section of the safety chain is shorter than the interconnect cable. The safety chain—not the
interconnect cable—should bear the weight of the housing.
2)
Lower the housing until the safety chain is taut to ensure that it is secure.
1040647A / July 2003
17
Summary of Contents for PowerDome Series
Page 1: ...PowerDome Series Installation Manual...
Page 44: ......
