PTZ and Dome Installation
PowerDome Installation Manual
3.4 I
NSTALLING THE
D
OME
A
SSEMBLY
The PowerDome comes with one of four acrylic
dome assembly options: bronze, clear, smoke,
chrome mirror, gold mirror, polycarbonate clear,
or polycarbonate smoke. Each dome assembly
attaches to the upper housing with interlocking
clips and a dome safety cable. Always take great
care not to damage the dome’s surfaces. Protect
the dome from dust and do not place it face
down on any surface.
7 inch pendant-mount housing
Safety
clip
Safety
cable
Mounting
clips
Flush-mount housing
Safety
clips
Safety
cable
Mounting
clips
Figure 48. Attaching the dome assembly to the upper housing
CAUTION:
Do not touch the acrylic when handling
the dome assembly. Use a scratch-
resistant cloth.
To attach the dome assembly to flush- and
pendant-mount housings:
1)
Fasten the dome safety cable to the upper
housing with the safety clip. See Figure 48.
2)
Position the dome such that the angled ends
of its mounting clips face the angled ends of
the clips attached to the upper housing.
3)
Turn the acrylic dome clockwise, so that the
ends of the mounting clips engage and lock
into place.
32
1040647A / July 2003
Summary of Contents for PowerDome Series
Page 1: ...PowerDome Series Installation Manual...
Page 44: ......
