Vista PowerDome Series, Installation Manual

Page: 23 / 44

PowerDome Installation Manual Housing Installation
24 VAC
Twisted-pair video
RS485 control
signal out (if used)
RS485 control
signal in (data in)
RS485 control
signal in
RS485 control
signal out (if used)
Video Data in (+ or A)
24 VAC Data in (- or B)
RJ45 Video out (+)
Heater/fan Video out (–)
24 VAC (A)
24 VAC (B)
Heater/fan
RJ45
Figure 32. Coaxial interface module Figure 33. UTP interface module
5) Push the cables and interface module back into the cable access opening.
6) Reinstall the cable access opening cover.
7) To install the optional heater/fan assembly see Appendix B.
2.2.2.1 C
REATING A
C
ONDUIT
H
OLE
To create a side-entry conduit hole in the wall mount see Figure 34.
1. Use the existing dimple as a guide to
drill a 9.5 mm (3/8 in.) pilot hole
2. Enlarge the 9.5 mm pilot hole
to a 23 mm (7/8 in.) hole
Figure 34. Creating the conduit hole
1040647A / July 2003 23