Housing Installation
PowerDome Installation Manual
2)
Feed the end of the cable assembly coming out of the mounting socket through the nipple on the
top of the junction box. See Figure 39.
Note:
Feed the video cable BNC connector through the nipple first and then the twisted-pair bundle.
3)
Remount the junction box onto the mounting plate using the hardware provided. See Figure 40.
Figure 39. Cable assembly into the chase nipple
Figure 40. Remounting the junction box
To make cable connections perform the following.
1)
Place the sealing gasket on the inside of the junction box cover, and then make the cable assembly
connections to the terminal strip. See Figure 41.
2)
WITH POWER OFF, make the facilities connections to the terminal strip on the inside of the junction
box cover. See Figure 41.
Twisted-pair wire
from inside junction box
Coaxial cable
from inside junction box
Used if video sent via
twisted-pair wire
Used if video sent via
coaxial cable
Sealing gasket
Swing arm connections
Facility connections
Figure 41. Cable assembly connections in the junction box
3)
Install the junction box cover. Ensure that the sealing gasket is properly positioned.
26
1040647A / July 2003
Summary of Contents for PowerDome Series
Page 1: ...PowerDome Series Installation Manual...
Page 44: ......
