Chapter 6: Data Details Tables
DE5450S Remote Programmer Guide Rev. 8
41
Note
: The Channel Lst. Msg. column displays the last channel on which data was
transmitted between the zone’s installed device and the control panel. When the
transmissions between the control panel and devices change channels, the
channel indication is displayed in various colors, such as the purple and yellow
indications in the above figure.
Condition
Description of Yes state
BYPASS
Bypassing of zone is enabled.
ALARM
Alarm is occurring in zone.
TROUBLE
Trouble detected in zone.
OPEN
Zone is open. For example, a room door was
opened.
TAMPER ALARM
Device tamper is occurring while system is an
Armed state.
TAMPER OPEN
Device tamper is occurring while system is either
in Armed or Disarmed state.
LOW BATTERY
Battery needs replacement or is not connected.
AC FAILURE
Electrical power is not supplied.
INACTIVE
Device is not communicating with control panel.
MODE
SET
– System is armed.
UNSET
– System is disarmed.
PERIODIC TEST
– Periodic test (walk test) in
process.
DIAGNOSTIC TEST
– Diagnostic test in
process.
1-WAY ONLY
Communication between device and control
panel occurring in one direction only.
PRE-ENROLLED
Enrollment of the device is not complete –
device needs to be associated with the control
panel.
