Chapter 2: Getting Started
DE5450S Remote Programmer Guide Rev. 8
3
Chapter 2: Getting Started
2.1 Hardware / Software Requirements
In order to run Remote Programmer, you need the following resources:
·
PC (2GHz or higher)
·
Microsoft® Windows® 7 (32-bit) or XP.
·
1GB RAM
·
At least 20 MB of free disk space.
·
For best performance, use a display driver with a resolution of at least
1024 x 768
pixels.
2.2 Installation
Install an internal modem in the computer, or use an RS-232 cable to connect an
external modem to one of the computer’s COM ports as instructed in the manual
supplied with the modem. Then connect the modem to the telephone line. The
modems suitable for use with Remote Programmer are listed in the
Modem
field in
the Communications tab of the Options window (refer to 7.1.2
Remote
Connection
).
To Install Remote Programmer
1.
Start Windows. Close all running applications, if any.
2.
Insert the Remote Programmer DVD into the DVD drive.
If your system includes the AutoPlay feature, the setup program starts
automatically. Otherwise, proceed as follows:
3. From
the
Start
menu, select
Run
; the Run dialog box appears.
4.
In the Run edit box, type the drive letter of the DVD drive you are using,
followed by a colon, backslash, and the word “setup”, for example:
"
d:\setup
".
