Chapter 6: Data Details Tables
DE5450S Remote Programmer Guide Rev. 8
31
Autoarm
: You can select to arm the control panel automatically (at a predefined
time).
Auto Arm Time
: You can define the time to automatically arm the system.
Squawk
: You can enable or disable the squawk (short siren sound) option upon
arming and disarming.
Time Format
: You can adjust the control panel built-in clock to show the time in
European format (hh:mm) or US format (hh:mm AM/PM).
Date Format
: You can adjust the control panel built-in calendar date to show the
date in European format (dd/mm/yyyy) or US format (mm-dd-yyyy).
6.3 User Codes
This table defines the PowerMax/PowerMaster users and lists their codes. Only
users, whose numbers and codes are listed in this screen, can activate the control
panel. PowerMax and PowerMaster-10 can store up to 8 user numbers and codes.
PowerMaster-30 can store up to 48 user numbers and codes. All User codes must
be different from the Duress code and Installation code.
User Number 1 is known as the Master User. He is the only user who has the
authority to modify the User Settings and User Codes screens. The Master User
code cannot be 0000.
To Enter a User Code
1.
Identify the user number you wish to define.
2.
Enter a four-digit code that is unique to the selected user number.
3.
Enter comments and additional information about this user.
4.
If Partitions are enabled (in the Site Information screen), choose the
partition(s) that this user is allowed to arm and disarm:
1
,
2
,
3
,
1+2
,
1+3
,
2+3
,
1+2+3
6.4 Panel Defintiions
Panel Definitions enables you to customize the control panel and adapt its
characteristics and behavior to the requirements of the particular user.
Available in P only.
