Chapter 6: Data Details Tables
40
DE5450S Remote Programmer Guide Rev. 8
After uploading data from the PowerMaster
you can view the RF ID numbers of all
enrolled devices. The received signal strength indication (RSSI) of the device can
also be viewed after pressing on the UL Table icon and then pressing "OK".
In the PowerG version, zone monitoring and configuration can be set up in
separate tables dedicated to monitoring Motion, Contact, Smoke, Camera, Flood,
Gas, Hard Wired Devices, and Temperature.
6.18 Zone Status/Trouble
This table is applicable to the PowerG models.
The Zone Status/Trouble screen displays diagnostic information for all zones that
are set up, equipped, and monitored on the premises. A
Yes
indication alerts that a
condition exists that needs checking. A
No
indication means that the condition is
normal.
Figure 6-2: Status Diagnostics
Available in PowerMaster models only
