manualshive.com logo in svg

Vision Research Phantom Miro LC Series, User Manual

The Vision Research Phantom Miro LC Series is an exceptional camera engineered for high-speed imaging. Enhance your photography skills with this revolutionary product. For detailed instructions and guidelines, conveniently download its comprehensive user manual for free at manualshive.com. Unleash your creativity and explore the full potential of this remarkable camera.

Share
Download
background image

Phantom Miro M & LC Series Camera Manual

60

Battery Installation

Carefully insert the battery just above the 
terminals. Notice the key guides on the sides of the 
battery and camera.

Insert battery either bottom-first or perfectly 
straight, then press down gently to lock in place.

Never insert the battery at a top-first angle.

Vision Research recommends the 
following procedure for safe battery 
installation and removal.
Only Sony BP-U30 and BP-U60 batteries 
are gaurenteed. Larger, heavier 
batteries should not be used.
Failure to follow this procedure could 
result in physical damage to the camera, 
which must be repaired at a Vision 
Research service center.

Summary of Contents for Phantom Miro LC Series











































































Reviews:

No comments

Related manuals for Phantom Miro LC Series

Panasonic NV-GS27GN Operating Instructions Manual preview
NV-GS27GN
Brand: Panasonic Pages: 44
VistaQuest VQ DV8 User Manual preview
VQ DV8
Brand: VistaQuest Pages: 11
Samsung HMX-R10 User Manual preview
HMX-R10
Brand: Samsung Pages: 157
Panasonic HDC HS100 - Flash Memory High Definition Camcorder Brochure & Specs preview
HDC HS100 - Flash Memory High Definition Camcorder
Brand: Panasonic Pages: 6
Panasonic HC-X900K Specifications preview
HC-X900K
Brand: Panasonic Pages: 4
Panasonic HC-X910GC Service Manual preview
HC-X910GC
Brand: Panasonic Pages: 76
Panasonic HDC HS100 - Flash Memory High Definition Camcorder Operating Instructions Manual preview
HDC HS100 - Flash Memory High Definition Camcorder
Brand: Panasonic Pages: 144
Panasonic HC-X910 Operating Instructions Manual preview
HC-X910
Brand: Panasonic Pages: 203
Sony DCR-DVD200 - Dvd Handycam Camcorder Specifications preview
DCR-DVD200 - Dvd Handycam Camcorder
Brand: Sony Pages: 2
Sony DCR VX2100 - Handycam Camcorder - 380 KP Specifications preview
DCR VX2100 - Handycam Camcorder - 380 KP
Brand: Sony Pages: 2
Sony DCR SR100 - Handycam Camcorder - 3.3 MP Brochure preview
DCR SR100 - Handycam Camcorder - 3.3 MP
Brand: Sony Pages: 2
Sony DCR SR100 - Handycam Camcorder - 3.3 MP Specifications preview
DCR SR100 - Handycam Camcorder - 3.3 MP
Brand: Sony Pages: 2
Sony DCR SR100 - Handycam Camcorder - 3.3 MP Application Manual preview
DCR SR100 - Handycam Camcorder - 3.3 MP
Brand: Sony Pages: 27
Sony DCR-DVD105 Nero Express 6 Service Manual preview
DCR-DVD105 Nero Express 6
Brand: Sony Pages: 70
Sony D8MM-01 Training Manual preview
D8MM-01
Brand: Sony Pages: 44
Sony DCR-DVD200 - Dvd Handycam Camcorder Service Manual preview
DCR-DVD200 - Dvd Handycam Camcorder
Brand: Sony Pages: 93
Sony DCR VX2100 - Handycam Camcorder - 380 KP Service Manual preview
DCR VX2100 - Handycam Camcorder - 380 KP
Brand: Sony Pages: 107
Sony DCR SR100 - Handycam Camcorder - 3.3 MP Operating Manual preview
DCR SR100 - Handycam Camcorder - 3.3 MP
Brand: Sony Pages: 107

Brands by name

Popular brands

Load more brands