Vision Research Phantom Miro LC Series User Manual Download

Page: 24 / 74

Phantom Miro M & LC Series Camera Manual

Indicates the exact number of recordable frames
available in the camera’s internal memory.

Indicates the total length of recording time (in
minutes and/or seconds).

Triggers the camera. Trigger is also available from
the red button on the front of the camera body, or
via capture port.

Turns on/off ‘Menu’ icons. Exiting the menu is an
electronic reset of the touch screen. Reset takes
about 5 seconds. Double-clicking the square button
also resets the screen.

Record Time

Trigger

Menu Button

Tapping the center of the screen will
also bring up menu icons.

Turns on/off all on-screen displays.

Indicates the user-defined resolution (width x
height), in pixels.

Indicates the power status (counts down).

Indicates the user-defined Exposure Time (in
milliseconds or microseconds).

Indicates the user-defined frame rate.

Indicates the camera serial number or user-defined
camera name.

Tap to view and select Cine files stored in RAM,
save and/or delete to re-arm the camera.

Tap to view the main ‘Capture and Setting’ control
interface.

Displays the status, number of gigabytes used, and
size (in gigabytes) of the Phantom CineFlash.

Displays when IBAT (Image-Based Auto-Tigger) is
enabled.

OSD Button

Number of Frames Available

Resolution

Volatge / Battery Life

Exposure Time

Speed

Serial Number / Name

Cine Management

Menu

CineFlash Status

IBAT Enabled

Summary of Contents for Phantom Miro LC Series











































































Search results

Summary of Contents for Phantom Miro LC Series

Reviews:

Related manuals for Phantom Miro LC Series

Brands by name

Popular brands

Vision Research Phantom Miro LC Series, User Manual

Search results

Summary of Contents for Phantom Miro LC Series

Reviews:

Related manuals for Phantom Miro LC Series

Brands by name

Popular brands