Vision Research Phantom Miro LC Series User Manual Download

Page: 23 / 74

Chapter 3: Miro LC Touchscreens

Miro LC

Touchscreens

The LCD Touchscreen can be used both as a
viewfinder and for touch screen controls.

The display will flip vertically when positioned
upside down (such as mounted against the side of
a camera, facing outward).

The symbol and color will change based on the
state of the camera.

Live

: camera is not recording to internal memory.

Displays a ‘Live’ image on the LCD and attached video
monitor.

Capture

: camera is recording to internal memory

(RAM), and awaiting a trigger signal. Displays a ‘Live’
image on the LCD and attached video monitor.

Triggered

: camera has been triggered, and is filling

internal memory (‘Post-Trigger’ frames). Displays a
‘Live’ image on the LCD and attached video monitor.

Cine Stored

: recording has ended, and a Cine is stored

in internal memory. Displays a ‘Live’ image on the LCD
and attached video monitor.

Playback

: camera is in PLAYBACK mode. RAM Cines

can be selected for playback.

Indicates the internal memory (RAM) partition the
Cine is being recorded into.

Indicates the day of the year/hour:minute:second:
microsecond.

This ‘time line’ represents all frames available
in the camera’s internal memory (RAM buffer /
circular buffer). The ‘T’ symbol above the time line
represents the user-defined trigger point.

Introduction

Camera State

Cine

Time Stamp

Internal Memory

Summary of Contents for Phantom Miro LC Series











































































Search results

Summary of Contents for Phantom Miro LC Series

Reviews:

Related manuals for Phantom Miro LC Series

Brands by name

Popular brands

Vision Research Phantom Miro LC Series, User Manual

Search results

Summary of Contents for Phantom Miro LC Series

Reviews:

Related manuals for Phantom Miro LC Series

Brands by name

Popular brands