manualshive.com logo in svg

Viscount UNICO 300, Reference Manual

The Viscount UNICO 300 is a state-of-the-art electronic organ that will bring unparalleled musical expression to your fingertips. With its wide range of features and exquisite craftsmanship, this instrument allows you to create mesmerizing melodies. Explore its limitless potential with the comprehensive user manual available for free download on manualshive.com.

Share
Download
background image

20

Viscount 

Physis Organs

Reference Manual

17. Swell pistons

-

[1] / [6]: Swell divisional combinations. These combinations can be modified. To do so, follow the
procedure described at point 20.

-

[HR] (only available for some models): restores the voice setup prepared in manual mode before a
Swell memory was recalled, when the piston itself  is on.

-

[MIDI SW] (only available for some models): to allows transmission of  notes played on this manual
on the MIDI [OUT] output.

-

[SW/P]: Swell to Pedal coupling.

-

[M.SOLO] (only available for some models): activates the MIDI SOLO function, which allows mono
transmission of  the notes played on this manual on the MIDI [OUT] output, with priority to the
highest note.

18. Great pistons.

-

[1] / [6]: Great divisional combinations. These combinations can be modified. To do so, follow the
procedure described at point 20.

-

[HR] (only available for some models): restores the voice setup prepared in manual mode before a
Great memory was recalled, when the piston itself  is on.

-

[MIDI GT] (only available for some models): to allows transmission of  notes played on this manual
on the MIDI [OUT] output.

-

[G/P]: Great to Pedal coupling.

-

[SW/G]: Swell to Great coupling.

-

[C/G] (only available for 3-manual models): Choir to Great coupling.

-

[M.SOLO] (only available for some models): activates the MIDI SOLO function, which allows mono
transmission of  the notes played on this manual on the MIDI [OUT] output, with priority to the
highest note.

-

[O.SOLO] (only in certain models): activates the Organ Solo function. By default, you can play the
melody with Swell stops when the Swell to Great coupling is active. Therefore, all the while the
function is active, notes are played with monophonic Swell voices. However the melody can be played
also on other manuals. To do so, access the corresponding options under the PROGRAMMABLE
FUNCTIONS menu (see par. 9.6).

19. Choir pistons.

-

[1] / [6]: Choir divisional combinations. These combinations can be modified. To do so, follow the
procedure described at point 20.

-

[HR] (only available for some models): restores the voice setup prepared in manual mode before a
memory for Choir was recalled.

-

[MIDI CH] (only available for some models): to allows transmission of  notes played on this manual
on the MIDI [OUT] output.

-

[C/P]:  Choir to Pedal coupling.

-

[SW/C]: Swell to Choir coupling.

-

[M.SOLO] (only available for some models): Activates the MIDI SOLO function, which allows mono
transmission of  the notes played on this manual on the MIDI [OUT] output, with priority to the
highest note.

20. [S] piston

: piston that saves general and divisional combinations, Tutti and Crescendo steps.

To save a combination or the Tutti, after setting up the voices, press and hold the [S] piston; then press
the piston/toe piston  corresponding to the combination you wish to save.
To save a Crescendo step, select it through the Crescendo pedal, press and hold [S], and then press the
general memories [HR] piston. To copy the content of  one step to another, first select the step you wish
to copy, then press and hold the  [S] piston, select the step in which you wish to paste the content, and
finally press the general memories [HR].

Summary of Contents for UNICO 300

















































































































Reviews:

No comments

Related manuals for UNICO 300

Baker Hughes Masoneilan 12400 Series Instruction Manual & Safety Manual preview
Masoneilan 12400 Series
Brand: Baker Hughes Pages: 81
3nh HG Series Operation Manual preview
HG Series
Brand: 3nh Pages: 10
Aaronia SPECTRAN V5 Manual preview
SPECTRAN V5
Brand: Aaronia Pages: 47
Waltron 9065 Quick Reference Manual preview
9065
Brand: Waltron Pages: 11
Labom BE Series Operating Instructions Manual preview
BE Series
Brand: Labom Pages: 6
Labom BE Series Operating Instructions preview
BE Series
Brand: Labom Pages: 5
Keithley System SourceMeter 2601B Instrument Specifications preview
System SourceMeter 2601B
Brand: Keithley Pages: 13
Keller-druck LEX 1 Ei Manual preview
LEX 1 Ei
Brand: Keller-druck Pages: 8
NanoEnTek JuLi Stage Installation Manual preview
JuLi Stage
Brand: NanoEnTek Pages: 4
GE AED Pro Service Manual preview
AED Pro
Brand: GE Pages: 35
Yamaha Electone FE-70 Manual preview
Electone FE-70
Brand: Yamaha Pages: 24
Hanna Instruments HI 717 Manual preview
HI 717
Brand: Hanna Instruments Pages: 2
Barksdale BLP1 Operating Manual preview
BLP1
Brand: Barksdale Pages: 2
Palstar ZM-30 Operating Manual preview
ZM-30
Brand: Palstar Pages: 15
Ansul WOM-3 Installation, Operation & Maintenance Manual preview
WOM-3
Brand: Ansul Pages: 24
ENDA ETS1410 Manual preview
ETS1410
Brand: ENDA Pages: 2
Heinrichs TM Operating Manual preview
TM
Brand: Heinrichs Pages: 31
PCB Piezotronics 3711E1125G Installation And Operating Manual preview
3711E1125G
Brand: PCB Piezotronics Pages: 11

Brands by name

Popular brands

Load more brands