manualshive.com logo in svg

Viscount UNICO 300, Reference Manual

The Viscount UNICO 300 is a state-of-the-art electronic organ that will bring unparalleled musical expression to your fingertips. With its wide range of features and exquisite craftsmanship, this instrument allows you to create mesmerizing melodies. Explore its limitless potential with the comprehensive user manual available for free download on manualshive.com.

Share
Download
background image

1

 

Viscount

 

Physis Organs

Reference Manual

INDEX

1. Important notes .............................................................................................................................. 3

1.1 Looking after the product .............................................................................................................................. 3
1.2 Notes about the manual .................................................................................................................................. 3

2. Introduction.................................................................................................................................... 5

3. General description ........................................................................................................................ 6

4. Programming section and main screen ........................................................................................23

4.1 Error messages – Main screen ..................................................................................................................... 24

5. Setting the volumes (Volumes function) .......................................................................................24

6. Tuning the instrument (Tuning menu) ........................................................................................25

7. The organ styles (Styles menu) .....................................................................................................26

8. Selecting and regulating the voices (Voices menu) ......................................................................27

8.1 Regulating the volume (Volume Level function) ....................................................................................... 28
8.2 Regulating the audio parameters (Edit Parameters function) .................................................................. 28
8.3 Selecting the alternative voices (Alternative Voice function)................................................................... 30
8.4 Selecting and adjusting the orchestral voices ............................................................................................. 31
8.5 Saving different orchestral voices and parameters in the combinations ................................................ 33

9. Instrument general settings ..........................................................................................................34

9.1 Adjusting the tremolos (1st Tremolo and 2nd Tremolo functions) ....................................................... 34
9.2 Selecting the reverberation style (Reverberation function) ...................................................................... 35
9.3 Adjusting the internal equalizer (Int. Ampl. Equalizer function) ........................................................... 36
9.4 Arranging the voices in the internal amplification (Int. Amp. Panning function) ................................ 37
9.5 Stereophonic balance of  the side speakers (Int. Amp. Tune-Up function)........................................... 41
9.6 Commands and controls optrions (Programmable functions)................................................................ 42
9.7 Programming the [SWS] piston function (Sws Programming function) ............................................... 45
9.8 Regulating the rear outputs equalizer (Ext. Out Equalizer function) ..................................................... 46
9.9 Regulating the rear output [GEN. SUB] equalizer (Ext. Sub Equalizer function) ............................... 47
9.10 Setting the routing  of  the voices on the rear audio outputs (Ext. Out Router function) ................ 48
9.11 Regulating the volume of  the rear outputs (Ext. Out Volume function) ............................................ 52
9.12 Configuration of  the external audio outputs (Ext. Out Config function) .......................................... 53
9.13 Automatic resize of  External Routers (Ext. Out Resize function) ...................................................... 54

10. Utilities and MIDI  functions (Util. & MIDI menu) ..................................................................55

10.1 Regulating the internal clock (Set Date & Time function) .................................................................... 57
10.2 Controlling the  access to the organ settings (Lock Organ function) .................................................. 57
10.3 Restoring factory settings (Restore Fact. Sett. function) ........................................................................ 59
10.4 Upgrading the operating  system (Op. Sys. Upgrade function) ............................................................ 60
10.5 MIDI functions ............................................................................................................................................ 61

11. File managements functions (File Manag. menu) ......................................................................64

11.1 File management (Dir function) ................................................................................................................ 65
11.2 Loading organ combinations and/or settings (Load function)............................................................. 66

Summary of Contents for UNICO 300

















































































































Reviews:

No comments

Related manuals for UNICO 300

Major tech MT350 Instruction Manual preview
MT350
Brand: Major tech Pages: 8
Waltron 9072 User Manual preview
9072
Brand: Waltron Pages: 25
TA Q Series Getting Started Manual preview
Q Series
Brand: TA Pages: 58
Cameron NUFLO Scanner 2000 microEFM Quick Start Manual preview
NUFLO Scanner 2000 microEFM
Brand: Cameron Pages: 8
Gardner Bender PM3000 Operating Instructions preview
PM3000
Brand: Gardner Bender Pages: 4
GAPS Clack WS1 Installation, Operation And Maintenance Manual preview
Clack WS1
Brand: GAPS Pages: 36
yellow jacket 68940 Operation Manual preview
68940
Brand: yellow jacket Pages: 26
M-system 47DV Manual preview
47DV
Brand: M-system Pages: 13
Make Noise PHONOGENE Owner'S Manual preview
PHONOGENE
Brand: Make Noise Pages: 15
Major tech MT785 Instruction Manual preview
MT785
Brand: Major tech Pages: 40
Velleman DCM120 User Manual preview
DCM120
Brand: Velleman Pages: 96
OBD VD10 User Manual preview
VD10
Brand: OBD Pages: 5
Vigor Equipment V 2795 Operating Instructions Manual preview
V 2795
Brand: Vigor Equipment Pages: 12
Balluff BML-S1G0-Q71 Series Condensed Manual preview
BML-S1G0-Q71 Series
Brand: Balluff Pages: 20
Analog Arts SA975 Instruction Manual preview
SA975
Brand: Analog Arts Pages: 8
Milwaukee Heavy Duty 2270-20 Original Instructions Manual preview
Heavy Duty 2270-20
Brand: Milwaukee Pages: 33
Sonel CMP-400 Operating Manual preview
CMP-400
Brand: Sonel Pages: 26
MRC PVB-820 Operation Manual preview
PVB-820
Brand: MRC Pages: 14

Brands by name

Popular brands

Load more brands