Viscount UNICO 300 Reference Manual Download

Page: 78 / 112

Viscount

Physis Organs

Reference Manual

FILE COPY FAILED – CAN’T READ SOURCE FILE’S PROPETIES

The system can’t read the file.

FILE COPY FAILED – SOURCE FILE IS NOT A REGULAR FILE

The copy failed because the file is not standard (it might be a directory or a link).

FILE COPY FAILED – CAN’T OPEN SOURCE FILE

The system can’t open the file that it is trying to copy.

FILE COPY FAILED – CAN’T READ SOURCE FILE

The system can’t read the file that it is trying to copy.

FILE COPY FAILED – CAN’T OPEN DESTINATION FILE

The system failed to create the new file.

FILE COPY FAILED – CAN’T WRITE DESTINATION FILE

The system failed to write the new file.

FILE RENAME FAILED

The system failed to rename the file.

FILE DELETED FAILED – CAN’T REMOVE SELECTED FILE

The system failed to delete the file.

FILE DELETED FAILED – CAN’T REMOVE FILE TO BE REPLACE

The system failed to delete a file while trying to rename or overwrite a file.

FILE SAVE FAILED – CAN’T CREATE FILE

The system failed to save a file, because it could not create a new file.

FILE SAVE FAILED – CAN’T WRITE FILE’S HEADER

The system failed to save a file, it could not write the file’s header.

FILE SAVE FAILED – CAN’T WRITE FILE’S DATA

The system failed to save the file because it couldn’t write the file’s data.

FILE LOAD FAILED – CAN’T OPEN FILE

The system failed to load a file, the desired file could not be opened.

FILE LOAD FAILED – CAN’T READ FILE’S HEADER

The system failed to load a file, its header was impossible to read.

FILE LOAD FAILED – FILE’S LENGTH CHECK FAILED

The file load failed because the actual file length is different from what stated in the header.

FILE LOAD FAILED – INVALID VERSION NUMBER

File load failed because the file has been generated with a newer and not compatible release of the operating
system.

FILE LOAD FAILED – CAN’T READ FILE’S DATA

The system failed to load a file, its data could not be read.

FILE LOAD FAILED – INVALID FILE’S CHECKSUM

The system could not load a file. The checksum test failed.

Summary of Contents for UNICO 300

















































































































Search results

Summary of Contents for UNICO 300

Reviews:

Related manuals for UNICO 300

Brands by name

Popular brands

Viscount UNICO 300, Reference Manual

Search results

Summary of Contents for UNICO 300

Reviews:

Related manuals for UNICO 300

Brands by name

Popular brands