Viscount UNICO 300 Reference Manual Download | Manualshive

Page: 105 / 112

background image

103

Viscount

Physis Organs

Reference Manual

PROGRAM CHANGE

This message is used to select the programs or sounds of  the receiver instrument.
There is also a specific standard called General MIDI which describes which sound should be recalled for
each Program Change received. This association is usually described by means of  a table included in the user
manual of  the instrument which adopts the standard.
This message contains the following information:

Program Change

: voice or program change;

Program Change Number

: the number of the program or voice to be activated;

CONTROL CHANGE

These are control messages (often associated to trimmers or pedals) used to add expression to the performance,
allowing you to set (and control in real time if necessary) voice parameters such as volume (CC n.7) or the
position of the swell pedals (CC n.11), etc.
This message contains the following information:

Control Change:

a controller has been adjusted

Controller Number:

which controller has been adjusted

Controller Position:

the position of the controller

SYSTEM MESSAGES

SYSTEM EXCLUSIVE

These messages can only be interpreted by an instrument made by the same producer as the transmitter
device (in some cases only by the same model). They mainly relate to the instrument’s sound generation and
programming parameters. The Unico uses these messages to control all the internal parameters and for
switching the voices on and off.

REAL TIME

These messages are used for the real-time control of specific modules or functions of a connected instrument.
These messages include the Start, Stop, Pause/Continue and Clock commands.

START

: the sequencer has started to record or play back a MIDI sequence

STOP

: the sequencer has been stopped

PAUSE

/

CONTINUE

: the sequencer has been set in stop status

CLOCK

: the sequencer speed

N.B.

The organ does not transmit / receive the messages described above. They are described for your
information only.

The Real Time messages also include the Active Sensing code, sent to keep the dialogue between two MIDI
instruments alive. When the receiver instrument does not receive any MIDI data or the Active Sensing code
in a time interval of about 300 milliseconds, it considers the MIDI connection to have been deactivated, so
it switches off any notes still active. Remember that the transmission and reception of this message is optional,
so not all instruments are equipped to handle it.

«
...
103
104
105
106
107
...
»

Summary of Contents for UNICO 300

















































































































Reviews:

No comments

Related manuals for UNICO 300

Brand: XS Scuba Pages: 24

Brand: VEE GEE Pages: 2

Brand: Oakton Pages: 4

Brand: Raycus Pages: 40

Brand: RaycoWylie Pages: 31

Brand: Vaisala Pages: 2

Dusty Harp Pickup Series

Brand: Dusty Strings Pages: 5

Brand: Reed Instruments Pages: 14

Brand: Lutron Electronics Pages: 43

Brand: R&S Pages: 130

Brand: ABQ Industrial Pages: 32

Brand: YZXStudio Pages: 3

Celviano AP-60R

Brand: Casio Pages: 44

Brand: Saab Pages: 116

Brand: M-system Pages: 5

Brand: P3 International Pages: 12

Brand: Samick Pages: 48

Brand: DISTELL Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands