Viscount UNICO 300 Reference Manual Download

Page: 26 / 112

Viscount

Physis Organs

Reference Manual

[SEQUENC]:

screens for use of the instrument’s internal sequencer.

[VOLUMES]:

screen containing all the instrument’s volumes.

[FIELD

]

and

[FIELD

buttons used to move the cursor, identified by the field in reverse.

[FIELD

] moves it in the field above or the previous field, [FIELD

] in the field below or the next

field.

[VALUE +] and [VALUE -]:

buttons which regulate the values of the parameters, whether they are

numerical or alphanumerical. [VALUE +] increases, [VALUE -] decreases.

[EXIT] and [ENTER]:

access and quit the display screens and menus, or confirm or cancel

prompts made by the system. [ENTER] accesses menus/screens and confirms, [EXIT] quits menus/
screens and cancels.

4.1 ERROR MESSAGES - MAIN SCREEN

USB PORT MALFUNCTION - USB PEN IS INACTIVE, PLEASE CALL FOR SERVICE

The USB port is malfunctioning, please contact the technical assistance at the e-mail address

[email protected].
This error message might also appear when accessing the FILE MANAGEMENT functions, the Sequencer
or launching an operating system update.

5. SETTING THE VOLUMES

(VOLUMES function)

The

Physis

organs allow the user to adjust all the volumes, in order to obtain a perfect sound balance among

the sections and between internal and external amplifications. To visualize the volume screen, press the
[VOLUMES] button:

MST

(Master): the organ’s overall volume, which can also be adjusted with the [MASTER VOLUME]

trimmer underneath the manuals.

REV

(Reverb): reverb effect, which can also be adjusted with the [REVERB VOLUME] trimmer

underneath the manuals.

models equipped with

front and side speakers

3 manuals models

2 manuals models

4 manuals models

Summary of Contents for UNICO 300

















































































































Search results

Summary of Contents for UNICO 300

Reviews:

Related manuals for UNICO 300

Brands by name

Popular brands

Viscount UNICO 300, Reference Manual

Search results

Summary of Contents for UNICO 300

Reviews:

Related manuals for UNICO 300

Brands by name

Popular brands