manualshive.com logo in svg

VIRDI AC-2200, User Manual

Share
Download
VIRDI AC-2200 User Manual Download Page 60

 

AC-2200 User Guide 

60

 

 

 

Union Community / (138-050) 5

th

 Fl., Hyundai Topics Building, 44-3, Bangi-dong, Songpa-

gu, Seoul, Korea // Tel : 82-2-6488-3000 , Fax : 82-2-6488-3099 
E-mail: [email protected]; http://www.unioncomm.co.kr 

 

 

 

3.8.3.1. 1:1 Level Setting 

 

 

 

Default Setting: ‘4’ 

 

This option is to set the match degree with the same fingerprint when comparing the fingerprint 
on  the  fingerprint  input  window  with  the  user  fingerprint  saved  in  the  database.  The  higher 
authentication  level  may  ensure  the  higher  security.  But  it  requires  the  relatively  high 
concordance rate. When authenticating User ID, it high likely to deny authentication. 

 

In case of 1:1 Authentication Level, if the ID entered to the authentication level that underwent 
the authentication process with the ID input is ‘1234’, this option finds the fingerprint registered 
to  the  ID  of  ‘1234’  from  the  terminal  database  and  compares  it  with  the  fingerprint  on  the 
fingerprint input window. 

 

However,  in  case  of  1:1  authentication,  if  the  1:1  authentication level of  users is  not  set to ‘0’ 
(using the terminal authentication level), the 1:1 authentication level of users is applied. 

 

Press [ENT] button to move to the next setting. 

 
 

3.8.3.2. 1:N Level Setting 

 

 

 

Default Setting: ‘4’ 

 

This option is to set the authentication level using the fingerprint only without ID input. 
This option is used to find the fingerprint matched by comparing the fingerprint on the fingerprint 
input window with the user fingerprint saved in the database. 

 

In  case  of  1:N  authentication,  the  user-specific  authentication  level  is  not  set.  Therefore, 
authentication is always based on the terminal authentication level. 

 

Press [ENT] button to move to the next setting. 

Summary of Contents for AC-2200










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands