VIRDI AC-2200 User Manual Download Page 30

Page: 30 / 73

AC-2200 User Guide

Union Community / (138-050) 5

Fl., Hyundai Topics Building, 44-3, Bangi-dong, Songpa-

gu, Seoul, Korea // Tel : 82-2-6488-3000 , Fax : 82-2-6488-3099
E-mail: [email protected]; http://www.unioncomm.co.kr

The followings show LCD prompts that may appear during the registration process.

When registration is successful

Fail!

When registration fails

If the fingerprint image is unclear, or if no fingerprint is
entered for ten seconds after the FP sensor lights off

Duplicated FP!

If the fingerprint registered already is registered again

User FP Full!

If ten fingerprints have been registered in the relevant ID

[4] When selecting “Add CARD”

To cancel the registration, press [ESC] button.

When placing your card on the LCD, the successful buzzer occurs and the newly entered card

number is added.

If card change fails, the “Fail” buzzer occurs and the screen returns to the “3. Modify” menu.

The followings show LCD prompts that may appear during the registration process.

When registration is successful

Fail!

When registration fails

Duplicated Card!

If the card registered already is registered again

User Card Full!

If ten fingerprints have been registered in the relevant ID

Summary of Contents for AC-2200









































































Search results

Summary of Contents for AC-2200

Reviews:

Brands by name

Popular brands

VIRDI AC-2200, User Manual

Search results

Summary of Contents for AC-2200

Reviews:

Brands by name

Popular brands