manualshive.com logo in svg

VIRDI AC-2200, User Manual

Share
Download
VIRDI AC-2200 User Manual Download Page 55

 

AC-2200 User Guide 

55

 

 

 

Union Community / (138-050) 5

th

 Fl., Hyundai Topics Building, 44-3, Bangi-dong, Songpa-

gu, Seoul, Korea // Tel : 82-2-6488-3000 , Fax : 82-2-6488-3099 
E-mail: [email protected]; http://www.unioncomm.co.kr 

 

 

 

 

Default Setting: ‘2’ (Unlock Terminal) 
 

 

This function allows the administrator to directly lock or unlock the terminal without the server 
program. If it is set to ‘1’, nobody can access the office until the administrator releases the set. 

 

After selecting the set value, press [ENT] button, and the screen will go to the upper menu. 

 
 

3.7.2. Card Number Inquiry 

 

Select [F3~]→[5.Ext Function]→[2.Read Card] on the main screen, and the following screen will 
appear.

 

 

 

 

 

 

This is an additional function regardless of the terminal environment setting. In the case of the 
terminal that the card reader is added, the card number can be checked for card registration via 
the server. Place the card on this screen, and the card number will be displayed on the LCD.

 

 

To exit the card read, press [ESC] button to move to the upper menu. 

 
 

3.7.3. Monitor Input Port Setting 

 

This  option  acts  to  connect  the  sensor  to  the  terminal  input  port,  and  send  a  notice  message  to  the 
server when the status is changed. 

 

Select [F3~]→[5.Ext Function]→[3.Monitor] on the main screen, and the following screen will 
appear.

 

 

(Caution) DM2 is a currently unused spare port. Before using the relevant function, check the required 
ports and install.

 

 

Summary of Contents for AC-2200










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands