Chapter 4 Deployment TM-E
Manual VIPA TM-E
3-24
HB39E - TME - RE_900-1E650 - Rev. 09/11
Installation of the SIM card
Caution!
Please regard the SIM card may only be plugged if you have configured it
at the TM-E Web page, before. Else your SIM card may be blocked!
For the further approach it is precondition that you have access to the Web
page of the TM-E module and you have a valid GSM SIM card with PIN.
•
Open the Web page of the TM-E module.
•
Navigate via
Configuration
>
System setup
to the page
"Communication".
•
Open at the navigation tree
Interfaces
the page "Modem".
•
At "GSM PIN" type in the pin number, which is delivered with your SIM
card. Leave every values at default setting and click at [Update].
The slot for the SIM card is located at the rear-side of the module. The SIM
card should be installed before the assembly. The installation happens with
the following approach:
•
Pull the SIM card holder by pushing the eject button with a pointed
object. The eject button may be found above the card slot.
•
Insert the SIM card as shown to the SIM card holder. Please regard here
the correct positioning.
•
Put the SIM card holder back again into the module until it snaps easily
into place. Please regard here the correct positioning.
Preconditions
Configuration at
the Web page
Installing the
SIM card
