Chapter 4 Deployment TM-E
Manual VIPA TM-E
3-16
HB39E - TME - RE_900-1E650 - Rev. 09/11
TM-E - PLC linking
For the further approach there is condition your TM-E module has valid IP
address parameters and the Web page of the TM-E module may be
accessed.
To get access to the VIPA PLC, the VIPA CPU is to be connected to the
MPI jack of the TM-E module via a suited MPI cable.
If there is an Ethernet CP within your PLC, for TM-E access you may
connect it to Ethernet instead to MPI.
Switch-on the power supply of the CPU and switch the CPU to RUN.
•
Open the concerning Web page of the TM-E module. Now you are
requested for access parameters. Per default the TM-E module has the
following access parameters:
Access parameters
User name: adm
Password: adm
•
After entering of
User name
and
Password
the Web page of the TM-E
module is opened.
•
Open with
Configuration
>
IO Server Config
the page to preset I/O
server.
Preconditions
Connect VIPA PLC
via MPI
Configure VIPA
PLC in TM-E
