Chapter 4 Deployment TM-E
Manual VIPA TM-E
3-40
HB39E - TME - RE_900-1E650 - Rev. 09/11
Teleservice via SMS
With the TM-E module with GSM modem there is the possibility to remote
control your connected PLC.
Here a script language with a syntax similar to BASIC is used.
In this part we cannot nearly describe the programming instructions. More
information about this script language may be found in the programming
guide in German an English at:
suppport.ewon.biz
www.ewon-online.de
The TM-E module from VIPA is constructed in the same way as the module
"eWON2001".
For the further proceeding it is precondition you have access to the Web
page of the TM-E module and your CPU is connected to the TM-E module
via MPI and accordingly configured.
Further it is precondition that a SIM card installed and your TM-E module is
connected to the mobile network.
•
To create a script open the Web page of the TM-E module.
•
Open with
Configuration >
Script setup
the "Script Section". The
following dialog window is opened:
Here the scripts may be programmed and administrated. Per default there
are the scripts "Init Section" and "Cyclic Section", which are empty.
The script processing should always be stopped with [STOP (currently
running)], before a script is been created respectively edited.
With [RUN (currently stopped)] the scripts processing may be started again
after editing.
At the following pages you may find scripts for the following applications:
•
Reboot TM-E via SMS
•
Acknowledge alarm via SMS
•
Request an eMail report via SMS
Overview
Precondition
Creating a script
Example
